d300ge2

Kenwood TK-D200GE2

£340.00 Exc. Vat

Kenwood TK-D200GE2 radios (VHF DMR Portable with GPS) radios are one of the first models in Kenwood’s new digital radio range to comply with the ETSI DMR air interface protocol specification in Tier 2.

10 in stock

Product Description

Kenwood TK-D200GE2 radios (VHF DMR Portable with GPS) radios are one of the first models in Kenwood’s new digital radio range to comply with the ETSI DMR air interface protocol specification in Tier 2.

Product Info

Kenwood TK-D200GE2 radios are designed to meet requirements of users who operate small-scale communication systems and / or who require ETSI compliant product.

Key Features

  • TDMA 2-Slot DMR Digital Air Interface
  • Kenwood TK-D200GE2 Radios Complie with ETSI DMR Standard TS 102 361-1, -2 and -3
  • 2-Slot/1-Carrier 12.5 kHz Channels (Digital)
  • 2″ Colour TFT QVGA LCD Display (E-models)
  • Kenwood TK-D200GE2 Radios Have A Built-in GPS unit (G-models)
  • Kenwood TK-D200GE2 Radios Have A Extra Large 512 Channel Capacity (E2-models 64 chs)
  • AMBE+2™ VOCODER
  • Kenwood TK-D200GE2 Radios Can Work In Analogue FM and DMR Digital Dual-mode
  • Man Down’ Function Built-In
  • Emergency Call/Lone Worker Features
  • Voice Guide Function
  • 5-Tone Encode / Decode
  • Voice + Text Messaging
  • Contacts List Mode
  • Rugged Construction (MIL-STD 810 C/D/E/F/G and IP54/55)

Technical Data

Technical Specifications

Frequency Range 136 – 174 MHz
Number of Channels 64
Number of Zones 4
Channel Frequency Spread 38 MHz
Channel Spacing – Analogue – Wide/Mid/Narrow 25 kHz/20 kHz/12.5 kHz
Channel Spacing – Digital 12.5 kHz
Antenna Impedance – 50 Ohm Yes
Battery Life 5-5-90 with Battery Saver ON –
with KNB-55L: approx 13 hours
with KNB-57L: approx 18 hours
Frequency Stability ± 1.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range -30 °C to + 60 °C
Operating Voltage 7.5 V DC ± 20%
Dimensions With KNB-55L:
56 x 131 x 37.1 mm
With KNB-57L:
56 x 131 x 39.1 mm
Projections not included
Weight (net) With KNB-55L: 353 g
With KNB-57L: 380 g

Receiver Specifications

Adjacent Channel Selectivity (Analogue) 76 dB at 25 kHz
68 dB at 12.5 kHz
Audio Output 500 mW with less than 3% distortion. 8 Ohms Impedance
Intermodulation (Analogue) 65 dB
Sensitivity (Analogue) – EIA 12 dB SINAD 0.28 µV at 25 kHz
0.32 µV at 12.5 kHz
Sensitivity (Analogue) – EN 20 dB SINAD -3 dB µV at 25 kHz
-1 dB µV at 12.5 kHz
Sensitivity (Digital) 5% BER: 0.3 µV/-4.5 dBµV emf
1% BER: 0.45µV/-1 dBµV emf
Spurious Reponse Rejection (Analogue) 75 dB

Transmitter Specifications

RF Power Output (High/Low) 5 W / 1 W
FM Noise (EIA) Analogue:
45 dB at 25 kHz
40 dB at 12.5 kHz
Modulation Distortion Less than 3%
Modulation Limiting Analogue:
± 5.0 kHz at 25 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN) -36 dBm ≤ 1 GHz
-30 dBm > 1 GHz

Videos

Downloads

Kenwood TK-D200GE2