nxr710e

Kenwood NXR-710E

£1,560.00 Exc. Vat

Kenwood NXR-710E uses advanced DSP-driven digital voice technologies and support both FM analogue and new digital fleets. System type conversion or expansion only requires software options and/or additional base station units, i.e., no “major” upgrading.

10 in stock

Product Description

Kenwood NXR-710E uses advanced DSP-driven digital voice technologies and support both FM analogue and new digital fleets. System type conversion or expansion only requires software options and/or additional base station units, i.e., no “major” upgrading.

Kenwood offers NEXEDGE® conventional, trunked and wide area trunked IP network solutions with secure digital voice and an array of advanced digital feature sets for business and government sectors.

Product Info

Kenwood NXR-710E repeaters are cost effective VHF repeaters, a great solution for your digital NEXEDGE two way radio system. Kenwood NXR-710E repeaters operate in both analogue and digital modes.

Key Features

  • Kenwood NXR-710E Repeaters Have A 5- 25W Output Power
  • 10 Character Alphanumeric LCD
  • Large Channel Capacity (260 Channel / 128 Zone)
  • NXDN™ Digital Air Interface
  • AMBE+2™ VOCODER
  • 6.25 & 12.5 kHz Channels (Digital)
  • Kenwood NXR-710E Repeaters Have Digital Conventional / Trunking Mode
  • FM Conventional Mode
  • MPT1327 Trunking (Future Upgrade)
  • NXDN™ Digital Scrambler
  • FleetSync® / FSII Compatibility
  • DTMF Encode / Decode
  • Kenwood NXR-710E Repeaters Have Emergency Call Features
  • Kenwood NXR-710E Repeaters Have A Variety Of Scan Features
  • Transparent Data Features

Technical Data

Technical Specifications

Frequency Range 136 – 174 MHz
Number of Channels 30
Channel Frequency Spread 38 MHz
Channel Spacing Analogue : 25 kHz/20 kHz/12.5 kHz
Channel Spacing – Digital – Wide/Narrow 12.5 kHz/6.25 kHz
Antenna Impedance – 50 Ohm Yes
Antenna Connector RX: BNC
TX: N
Current Drain Stand-By: 0.5 A
Receive: 1.0 A
Transmit: 11.0 A
Duty Cycle 100% at 25 Watts, 50% at maximum power
Frequency Stability ± 0.5 ppm (-30 °C to + 60 °C)
Operating Temperature Range -30 °C to + 60 °C
Operating Voltage 13.6 V DC (10.8 ~ 15.6 V DC)
PLL Channel Steps 2.5 kHz/3.125 kHz
Dimensions 483 x 88 x 340 mm
– Projections not included –
Weight (net) 9.7 kg

Receiver Specifications

Adjacent Channel Selectivity Analogue:
83 dB at 25 kHz
81 dB at 20 kHz
77 dB at 12.5 kHz
Audio Output 4 Watts with less than 5% distortion
Intermodulation Analogue: 72 dB
Sensitivity Digital:
3% BER:
0.28 µV at 12.5 kHz
0.22 µV at 6.25 kHz.
1% BER:
-4 dB µV at 12.5 kHz
-6 dB µV at 6.25 kHz.
Sensitivity – EIA 12 dB SINAD 0.28 µV
Sensitivity – EN 20 dB SINAD -3dB µV
Spurious Reponse Rejection (Analogue) 85 dB

Transmitter Specifications

RF Power Output 5 W – 40 W
FM Noise (EIA) 55 dB at 25 kHz
53 dB at 20 kHz
50 dB at 12.5 kHz
Modulation Distortion Less than 1%
Modulation Limiting Analogue:
± 5.0 kHz at 25 kHz
± 4.0 kHz at 20 kHz
± 2.5 kHz at 12.5 kHz
Spurious Emission (EN) -36 dBm ≤ 1 GHz
-30 dBm > 1 GHz

 

Videos

Downloads

 

Kenwood NXR-710E