rd965

Hytera RD965

£1,850.00 Exc. Vat

Hytera RD965 repeater is a compact and light indoor repeater. Hytera RD965 repeater is a new addition to Hytera’s migration products. The innovative design allows easy wall-mount installation with AC/DC power. Hytera RD965 repeater is a dual, analogue/digital repeater with embedded mini duplexer and power supply.  Analogue/digital back to back interconnect facilitates easy communication between analogue and digital users while telephone interconnect feature supports communication between radio and telephone users. With the IP port built in, Hytera RD965 repeater is suitable for a multi-site coverage, both indoor and outdoor.

10 in stock

Product Description

Hytera RD965 repeater is a compact and light indoor repeater. Hytera RD965 repeater is a new addition to Hytera’s migration products. The innovative design allows easy wall-mount installation with AC/DC power. Hytera RD965 repeater is a dual, analogue/digital repeater with embedded mini duplexer and power supply.  Analogue/digital back to back interconnect facilitates easy communication between analogue and digital users while telephone interconnect feature supports communication between radio and telephone users. With the IP port built in, Hytera RD965 repeater is suitable for a multi-site coverage, both indoor and outdoor.

Product Info

GPS
The GPS module enables emergency command centers to monitor the location of a small mobile network in real time if the repeater is used as mobile unit.

Smart Battery as backup (optional)
A 10 Ah smart li-Ion battery can support at least eight hours of work when working at 50 % duty cycle and high TX power as backup power supply for outdoor or mobile operation. Compatible with the SMBus 1.1 standard, Hytera RD965 repeater can monitor battery conditions such as estimated remaining capacity, used capacity percentage, and usage record. The repeater can also maximize the battery life through smart charge management to considerably enhance charging safety and reliably.

Repeater diagnostics and control
Through a PC-based application, Hytera RD965 repeater can monitor, diagnose and control remote (connected to the Internet via an IP port) and local repeaters (via a USB port). Hytera’s RDAC software supports network access at multiple points and allows the administrator to monitor networked two-way radios.

Voice Input/output via Dual Time Slots: easy for monitoring and voice recording
In digital mode, Hytera RD965 repeater supports voice input and output via dual time slots and enables users to record calls continuously.

Digital/analog compatibility and smart switching
Back to back interconnection of digital & analog network can be achieved by wired or wireless IP, ensuring a smooth analog-to-digital transition.

Flexible networking
By connecting geographically distributed repeaters that run at the same or different frequencies to form an IP-based and location-independent wireless communication network, IP-based repeater interconnection allows mobile radios to obtain voice and data services while roaming. Hytera RD965 repeater can be used together with Hytera RD985 in an network of repeaters.

Technical Data

General data
Frequency range VHF: 136 – 174 MHz
UHF: 400 – 470 MHz
Supported operation modes
  • DMR Tier II (DMR conventional)
  • Analog

DMR Tier II in reference to ETSI TS 102 361-1/2/3

Channel capacity 16
Number of zones 1
Channel spacing (analog) 12.5 / 20 / 25 kHz
Channel spacing (digital) 12.5 kHz
Operating voltage 13.6 ± 15% VDC
Storage battery: 14.8 V
Max. power consumption (in stand by) ≤ 0.8 A
Max. power consumption (during transmission) ≤ 3.5 A
Battery 10 Ah (lithium-ion battery)
Battery service life
(5-5-90 duty cycle, high transmitting power)
approx. 8 hours
Frequency stability ±0.5 ppm
Antenna impedance 50 Ω
Dimensions (H × W × D) 52 x 183 x 302 mm (repeater with protective housing)
42 x 172 x 280 mm (repeater without protective housing)
Weight 3.5 kg (without battery)
Transmitter
Transmitting power VHF: 1 / 10 W
UHF: 1 / 10 W
Modulation 11KΦF3E at 12.5 kHz
14KΦF3E at 20 kHz
16KΦF3E at 25 kHz
4FSK digital modulation 12.5 kHz (data only): 7K6ΦFXD
12.5 kHz (data and voice): 7K6ΦFXW
Interfering signals and harmonics -36 dBm < 1 GHz
-30 dBm > 1 GHz
Modulation limiting ±2.5 kHz at 12.5 kHz
±4.0 kHz at 20 kHz
±5.0 kHz at 25 kHz
Noise suppression 40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Adjacent channel selectivity 60 dB at 12,5 kHz
70 dB at 20/25 kHz
Audio sensitivity +1 dB to -3 dB
Nominal audio distortion ≤ 3 %
Digital vocoder type AMBE++
Receiver
Sensitivity (analog) 0.3 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD)
0.4 μV (20 dB SINAD)
Sensitivity (digital) 0.3 μV / BER 5%
Adjacent channel selectivity
TIA-603
ETSI
65 dB at 12.5 kHz / 75 dB at 20 and 25 kHz
60 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
Intermodulation
TIA-603
ETSI
75 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
Spurious response rejection
TIA-603
ETSI
75 dB at 12.5/20/25 kHz
70 dB at 12.5/20/25 kHz
Hum and noise 40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Nominal audio power output 0.5 W
Nominal audio distortion ≤ 3 %
Audio sensitivity +1 dB to -3 dB
Conducted spurious emission < -57 dBm
Ambiant data
Operating temperature range -30 °C to +60 °C
Storage temperature range -40 °C to +85 °C
ESD IEC 61000-4-2 (level 4)
± 8 kV (contact discharge)
± 15 kV (air discharge)
Protection against dust and moisture IP67
Shock and vibration resistance MIL-STD-810 C/D/E/F/G
Relative humidity MIL-STD-810 C/D/E/F/G
GPS
Time to first fix (TTFF) cold start < 1 minute
Time to first fix (TTFF) warm start < 10 seconds
Horizontal accuracy < 10 meters

Videos

Downloads

 

Hytera RD965